SESSREG

Section: User Commands (1)
Updated: Release 5
Index Return to Main Contents

NAME

sessreg - manage utmp/wtmp entries for non-init clients

SYNOPSIS

sessreg [-w wtmp-file] [-u utmp-file] [-l line-name] [-h host-name] [-s slot-number] [-x Xservers-file] [-t ttys-file] [-a] [-d] user-name

DESCRIPTION

Sessreg is a simple program for managing utmp/wtmp entries for xdm sessions.

System V has a better interface to /etc/utmp than BSD; it dynamically allocates entries in the file, instead of writing them at fixed positions indexed by position in /etc/ttys.

To manage BSD-style utmp files, sessreg has two strategies. In conjunction with xdm, the -x option counts the number of lines in /etc/ttys and then adds to that the number of the line in the Xservers file which specifies the display. The display name must be specified as the "line-name" using the -l option. This sum is used as the "slot-number" in /etc/utmp that this entry will be written at. In the more general case, the -s option specifies the slot-number directly. If for some strange reason your system uses a file other that /etc/ttys to manage init, the -t option can direct sessreg to look elsewhere for a count of terminal sessions.

Conversely, System V managers will not ever need to use these options (-x, -s and -t). To make the program easier to document and explain, sessreg accepts the BSD-specific flags in the System V environment and ignores them.

BSD also has a host-name field in the utmp file which doesn't exist in System V. This option is also ignored by the System V version of sessreg.

USAGE

In Xstartup, place a call like:


       sessreg -a -l $DISPLAY -x /usr/lib/X11/xdm/Xservers $USER

and in Xreset:


       sessreg -d -l $DISPLAY -x /usr/lib/X11/xdm/Xservers $USER

OPTIONS

-w wtmp-file: This specifies an alternate wtmp file, instead of /usr/adm/wtmp for BSD or /etc/wtmp for sysV. The special name "none" disables writing records to /usr/adm/wtmp.
-u utmp-file: This specifies an alternate utmp file, instead of "/etc/utmp". The special name "none" disables writing records to /etc/utmp.
-l line-name: This describes the "line" name of the entry. For terminal sessions, this is the final pathname segment of the terminal device filename (e.g. ttyd0). For X sessions, it should probably be the local display name given to the users session (e.g. :0). If none is specified, the terminal name will be determined with ttyname(3) and stripped of leading components.
-h host-name: This is set for BSD hosts to indicate that the session was initiated from a remote host. In typical xdm usage, this options is not used.
-s slot-number: Each potential session has a unique slot number in BSD systems, most are identified by the position of the line-name in the /etc/ttys file. This option overrides the default position determined with ttyslot(3). This option is inappropriate for use with xdm, the -x option is more useful.
-x Xservers-file: As X sessions are one-per-display, and each display is entered in this file, this options sets the slot-number to be the number of lines in the ttys-file plus the index into this file that the line-name is found.
-t ttys-file: This specifies an alternate file which the -x option will use to count the number of terminal sessions on a host.
-a: This session should be added to utmp/wtmp.
-d: This session should be deleted from utmp/wtmp. One of -a/-d must be specified.

COPYRIGHT

AUTHOR

Keith Packard, MIT X Consortium

This document was created by man2html, using the manual pages.
Time: 23:34:46 GMT, September 27, 2019